Rocket Fuel
/, Glue/FLEX GLUE™

FLEX GLUE™

Starting at: $12.99

SKU: N/A Categories: ,

Product Description

From the makers of Flex Seal®

  • FLEX GLUE™ is an easy to use, super strong, rubberized, waterproof adhesive that instantly bonds, seals and repairs virtually everything!
  • FLEX GLUE’s super thick adhesive clings to the surface and can be used on dry or wet surfaces… EVEN UNDERWATER!
  • FLEX GLUE’s amazing INSTANT GRAB holds objects in place and in most cases, eliminates the need for braces.
  • FLEX GLUE™ PRO FORMULA has EVEN MORE INSTANT GRAB!
  • FLEX GLUE™ is mildew and UV resistant, paintable, solvent free, VOC compliant, low odor and will not shrink or crack!
  • FLEX GLUE™ won’t run or drip and can easily be applied to vertical and overhead surfaces! 

FLEX GLUE™ is a powerful adhesive that can bond, seal, and repair virtually everything! FLEX GLUE™ is an easy to use, super strong, rubberized, waterproof adhesive with INSTANT GRAB. INSTANT GRAB works like a magnet, locks into place and holds on tight. It can be applied to wet or dry surfaces, even underwater! FLEX GLUE™ is mildew and UV resistant. It can be applied to vertical or overhead surfaces, and it’s even paintable. FLEX GLUE™ cures in 24-48 hours and reaches maximum strength in 7 days. No need for screws or nails, it’s perfect for all types of repairs! Now any project big or small, you can do them all!

FLEX GLUE™ PRO FORMULA has EVEN MORE INSTANT GRAB! Formulated for heavier materials, FLEX GLUE™ PRO FORMULA has more FLEX GLUE ™ with a dispensing method to make the big jobs easier. Standard caulking gun required (not included).

Excellent For: Home & garden, automotive & marine, boats, RV’s, trailers, maintenance Repairs, construction, plumbing & electrical, DIY projects & hobbies & so much more!

Images

Video

Directions

  • Surface must be free of grease, oil and dirt.
  • Remove cap and cut a large opening towards base of nozzle. Squeeze from bottom of the tube.
  • Apply liberally to one side of the surface being bonded and apply firm pressure continuously for 10-30 seconds or longer for instant grab to take hold. In some applications, bracing may be required.
  • FLEX GLUE™ cures in 24-48 hours and reaches maximum strength in 7 days. 
  • Replace cap to help prevent drying*

*After use extend a small bead from nozzle and screw cap tight. Bead will cure to form a plug. Remove plug and use again.

 

NOTE: Assemble or tool within 10 minutes of application.

USE ON: All types of metal, wood, foam, rubber, tile, ceramic, marble, porcelain, glass, granite, brick, concrete, stucco, plaster, stone, masonry, drywall, sheetrock, fiberglass, some plastics & vinyl’s, composites, PVC, EPS, EPDM roofs and so much more!

WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.

FAQ's

Q: How do I apply FLEX GLUE™?

A: FLEX GLUE™ is so easy to use! Just follow these simple steps:

6 oz. Squeeze Tube:
1. All surfaces must be free of grease, oil and dirt.
2. Remove cap and cut a large opening towards base of nozzle. Squeeze from bottom of the tube.
3. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for 10-30 seconds or longer for instant grab to take hold. Also, a slight shimmy on the surface while pressing together will increase surface penetration, and help allow instant grab to take hold. (In some applications, bracing may be required)
• FLEX GLUE™ cures in 24-48 hours and reaches maximum strength in 7 days.
• Replace cap to help prevent drying*.

NOTE: Assemble, re-position or tool within 10 minutes of application.
*After use extend a small bead from nozzle and screw cap tight. Bead will cure to form a plug. Remove plug and use again.

10 oz. Pro Cartridge:
1. Surface must be free of grease, oil and dirt.
2. Unscrew nozzle and cut nub. Replace cap and cut extension tube to desired length.
3. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for 10-30 seconds or longer for instant grab to take hold. (In some applications, bracing may be required)
• FLEX GLUE™ cures in 24-48 hours and reaches maximum strength in 7 days.

NOTE: Assemble, re-position or tool within 10 minutes of application.

Q: Can I apply FLEX GLUE™ underwater?
A: Yes! FLEX GLUE™ can be applied underwater and will cure underwater.

Q: Can I apply FLEX GLUE™ on a wet surface or when it’s raining?
A: Yes! FLEX GLUE™ can be applied on wet surfaces. Even in the rain, FLEX GLUE™ will not wash away.

Q: Can I use FLEX GLUE™ to seal out water, air or moisture?
A: Yes! FLEX GLUE™ is a super strong adhesive and can also be used as an incredible sealant.

Q: What will FLEX GLUE™ adhere to?
A: FLEX GLUE™ will adhere to most surfaces such as: All types of metal, wood, foam, rubber, tile, ceramic, marble, porcelain, glass, granite, brick, concrete, stucco, plaster, stone, masonry, drywall, sheet rock, fiberglass, some plastics & vinyl’s, composites, PVC, EPS, EPDM roofs and so much more!

Q: How do I prepare the surface before using FLEX GLUE™?
A: Make sure the surface is clean and free of grease, oil, and dirt.

Q: How long will it take FLEX GLUE™ to dry?
A: Once exposed to air or moisture FLEX GLUE™ will begin to cure.
Depending on temperature and humidity, FLEX GLUE™ will form a skin on the surface in approximately 10 to 20 minutes. Allow 24 to 48 hours to dry and 7 days to reach maximum strength.

Q: Can I smooth or tool FLEX GLUE™ once it has been applied?
A: Yes, FLEX GLUE™ can be tooled or re-positioned within 10 minutes of initial application.

Q: Will FLEX GLUE™ shrink over time?
A: No, FLEX GLUE™ will not shrink, crack, or peel over time.

Q: Is FLEX GLUE™ UV and mildew resistant?
A: Yes, FLEX GLUE™ is UV and mildew resistant.

Q: Can FLEX GLUE™ be painted?
A: Yes, once dry, FLEX GLUE™ can be painted with a high quality latex paint.

Q: What size does FLEX GLUE™ come in?
A: FLEX GLUE™ comes in two sizes, a 6oz squeeze tube and 10oz pro cartridge.

Q: What is the difference between FLEX GLUE™ in the squeeze tube vs. the pro cartridge?
A: Both FLEX GLUE’s have amazing instant grab! Our pro formula has even more instant grab to tackle the biggest jobs! Both FLEX GLUE™ squeeze tube and the pro cartridge dry in approximately 24-48 hours and will reach maximum strength in 7 days!

Q: What temperatures will FLEX GLUE™ withstand?
A: FLEX GLUE™ can withstand a wide range of temperatures, ranging from -40°F up to 200°F.

Q: What the temperatures can FLEX GLUE™ be applied in?
A: FLEX GLUE™ remains easy to dispense between 0° – 150°F.

Q: How do I clean up after using FLEX GLUE™?
A: Clean with a dry cloth. Residues can be removed with isopropyl alcohol.

Q: Can I use FLEX GLUE™ on drinking water, rain barrels, fish tanks etc.?
A: FLEX GLUE™ has not been tested for use on potable water sources.

Q: How many linear feet can I get out of one 6oz squeeze tube or one 10oz pro cartridge of FLEX GLUE™?
A: depending on the thickness of the bead, one 6oz squeeze tube will provide up to 30 linear feet and one 10oz pro cartridge will provide up to 50 linear feet.

Q: Can I apply FLEX GLUE™ overhead or on vertical surfaces?
A: Yes, FLEX GLUE™ can be applied on overhead and vertical surfaces and will not sag, drip or run.

Q: How long does it take for FLEX GLUE™ to reach maximum bonding strength?
A: FLEX GLUE™ gets stronger over time and reaches maximum strength in 7 days!

Q: Can I remove FLEX GLUE™ once its dry?
A: FLEX GLUE™ can be removed with sharp tools similar to a chisel, however, it may not be possible to separate bonded materials with out damaging the surfaces.

You may also like…