Flex Seal Pool Patch and Repair Kit
/, Flex MINIs/Flex Seal Pool Patch and Repair Kit

Flex Seal Pool Patch and Repair Kit

Only: $9.99/ea

SKU: FSPPOOL Categories: ,

Product Description

Don’t let a rip keep you from enjoying your pool this summer. Our Pool Patch and Repair kit will make fixing your pool easy, with everything you need to make the repairs quickly. Buy a few extra today and be prepared all summer long.


  • One (1) Flex Glue Mini Clear 0.6 oz Tube.
  • Two (2) Flex Tape Mini Clear 3″ x 4″.

Flex Tape Mini Product Features

  • Thick, flexible, rubberized adhesive
  • Conforms to any shape or object
  • Seals out water, air and moisture
  • Can be applied underwater
  • UV resistant
  • Environmentally friendly
  • VOC-free

Flex Glue Mini Product Features

  • Grabs instantly
  • Can be used on wet surfaces or underwater
  • Our crystal clear formula is mildew and UV resistant
  • Paintable and solvent free
  • Forms a flexible seal that won’t shrink or crack


Flex Glue Clear can be used on a variety of surfaces including masonry, concrete, metal, wood, foam, rubber, tile, ceramic, brick, fiberglass.

Flex Tape Clear can be used on PVC, acrylic, metal, steel, copper, aluminum, wood, ceramic, fiberglass, rubber, stucco, plaster, stone, cement, EPDM roofs, some plastics, vinyls and much more.

Be sure to check out our Flex Tape FAQs or our Flex Glue FAQs for more information.


For best results, when using on an above-ground pool, place a patch on the inside first, then place a second patch on the outside of the pool.

  1. PEEL. Remove the backing from the tape.
  2. STICK. Apply tape to a clean surface and press down firmly.
  3. SEAL. Using your fingers, plastic squeegee or roller, press down firmly and remove any air pockets.

Use the Flex Glue to make additional repairs around your pool, such as fixing broken tiles or masonry.

  1. Clean the surface. Make sure it is free of dirt, grease or oil.
  2. Remove cap. Peel or puncture foil cover. Squeeze from bottom of tube.
  3. Apply liberally. Apply firm pressure for 10-30 seconds to allow the instant grab to take hold. In some applications, bracing may be required.
  4. Cures in 24-48 hours. Reaches maximum strength in 7 days.


Using Flex Tape on Vinyl Pools