Use our handy kit to quickly fix damage from a storm. Includes (1) Flex Tape Clear 4″, (1) Flex Glue White 6 oz Tube, (1) Flex Glue Clear 4 oz Tube.
Video
Be Storm Ready with Flex Seal Products
Flex Glue
FLEX GLUE™ can be used in a variety of adhesive and sealant applications. The most common uses for Flex Glue are listed below:
Common Flex Glue Applications:
Household trim and molding
Tile bonding and sealing
Underwater repairs
Bonding landscape blocks
Paneling installation
Sealing showers and baths
Countertops & cabinets installation and repairs
Bonding back splash to walls
Window & door installation and sealing
Masonry Sealant
Installing wall stone
Pool tile repairs
Home exterior repairs
Gutter sealant
Adhere and repair house flashing and fascia
Roofing applications and repairs
HVAC sealing and repairs
Marine & RV applications and repairs
DIY projects
Emergency adhesive and sealant repairs
Industrial manufacturing applications
General construction applications
Recommended surfaces:
Metals
Wood
Foam
Rubber
Tile
Ceramic
Marble
Porcelain
Glass
Granite
Brick
Concrete
Stucco
Plaster
Stone
Masonry
Drywall
Sheetrock
Fiberglass
Some plastics & vinyl’s, composites, PVC, EPS, EPDM roofs and so much more!
*Additional applications and substrates exist beyond this list. We recommend testing prior to use.
FLEX GLUE® Squeeze Tube
Surface must be free of grease, oil and dirt.
Unscrew the nozzle and cut opening large enough to ensure the product can be properly dispensed.
Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold. In some applications, bracing may be required.
If needed, you may reposition object within 10 minutes of application.
Allow 24-48 hours for curing. Will reach maximum strength in 7 days.
FLEX GLUE™ Pro Formula (Caulk Gun Cartridge)
Surface must be free of grease, oil and dirt.
Unscrew the nozzle and cut off tip, leaving thread intact.
Replace nozzle and cut nozzle to the desired length.
Insert cartridge into a standard size caulking gun and squeeze trigger.
Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold. In some applications, bracing may be required.
If needed, you may reposition object within 10 minutes of application.
Allow 24-48 hours for curing. Will reach maximum strength in 7 days.
FLEX TIP:
After use, squeeze a small bead from the opening to form a plug. Simply cut the plug when you want to reuse.
WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.
For more information about Flex Glue, please review our FAQs.
Flex Tape
FLEX TAPE® has a triple-thick adhesive allowing it to virtually weld itself to the surface, instantly stopping the toughest leaks. The most common uses for Flex Tape are listed below:
Common Flex Tape Applications:
Leaky roofs and ceilings
Damaged gutters and down spouts
Boats, kayaks, personal watercrafts, canoes, and other outdoor equipment repairs
Repairs for mobile homes, RVs and campers
Leaky PVC and plumbing pipes
Sprinkler system, pool, and spa leaks and repairs
Patch and seal windows, doors, walls, seams, and vents
Repair air ducts and HVAC systems
DIY projects
And much more!
Recommended surfaces:
PVC
Acrylic
Metal
Steel
Copper
Aluminum
Wood
Ceramic
Porcelain
Tile
Glass
Rubber
Fiberglass
Stucco
Plaster
Stone
Cement
Concrete
Dry wall
EPDM roofs
Some plastics, fabrics, vinyl and so much more!
CUT. Leave backing on tape and cut to desired dimension. Make sure to use a high quality utility knife with disposable blades or a razor blade when cutting.
PEEL. Remove the backing from the tape.
STICK. Apply tape to a clean surface and press down firmly.
SEAL. Using your fingers, plastic squeegee or roller, press down firmly and remove any air pockets.
*Flex Tape is a temporary, emergency repair and is not meant to be a permanent fix.
**Flex Tape may not bond to all hoses.
FLEX TIPS:
For maximum adhesion on porous surfaces, using a standard blow dryer will help the adhesives bond with the surface.
Flex Tape’s bond will increase with time and pressure. Continued firm pressure will help increase adhesion.
Once fully bonded, Flex Tape cannot be repositioned.
Flex Tape adhesives may resist bonding to some plasticized or waterproof materials, siliconized, greasy, oily, dirty, or porous surfaces.
Certain fabrics such as canvas, nylon, polyester, synthetics, cotton and some other materials may need up to 24 hours to reach maximum hold.
For more information about Flex Tape, please review our FAQs.
