Flex Seal Liquid FAQ’S:
FLEX SEAL® LIQUID is a patent pending, proprietary formulation that starts out as a thick liquid and dries to a super strong, flexible, watertight rubberized coating. FLEX SEAL® LIQUID can be brushed, rolled, dipped or poured to create a high performance protective rubber barrier that blocks out air, water and moisture on a variety of surfaces and objects. Once cured, FLEX SEAL® LIQUID forms a durable, breathable, weatherproof, non-slip barrier that’s resistant to rain, snow, sun, wind, hail, air, moisture, UV degradation, extreme temperatures and natural weathering.
Q: How much will one can of FLEX SEAL® LIQUID cover?
A: Coverage will vary depending on number of coats used and what type of substrate you are applying FLEX SEAL® LIQUID to;
1 Large 16oz – up to 20Sq. Ft.,
1 Jumbo 32oz – up to 40Sq. Ft.
1 Giant Gallon – up to 150Sq. Ft.,
Q: How do I apply FLEX SEAL® LIQUID? HOW TO BRUSH, ROLL, DIP, POUR
A: Protective clothing is recommended. Stir can well. Make sure the surface is clean, dry and free of grease, oil and dirt. For better adhesion, etch the surface with sand paper or steel wool.
Make sure all cracks and holes have been completely filled and FLEX SEAL® LIQUID is completely dry before testing product. Flex Seal Liquid reacts with the air to cure. Once containers are exposed to the air a skin will form on the material over time. The skin will be less in winter months but can form within minutes in hot and humid summer conditions. Cured skin that has formed on the top of the material must be removed or it may make the material lumpy. Always cover open containers during and after use.
BRUSH & ROLL
Brush or roll FLEX SEAL® LIQUID using an even sweeping motion. Apply several even coats until the surface has been completely covered and ALL cracks and holes have been filled. Allow FLEX SEAL® LIQUID to dry 24 to 48 hours and apply additional coats as needed. Always brush or roll over a larger area than just where the leak occurred.
Dip object directly into FLEX SEAL® LIQUID making a slight swirling motion. Once you feel surface has been coated, remove and let any excess drip back into the can. Hang or clip the object in the same vertical position as it came out of the can and let dry. Once FLEX SEAL® LIQUID is fully cured you will have a super strong, no slip, rubberized coating on the surface.
Pour FLEX SEAL® LIQUID directly on the surface allowing gravity to take FLEX SEAL® LIQUID into cracks, holes and hard to reach areas. Continue to pour until the surface has been covered and all cracks and holes have been completely filled.
Q: How long will it take FLEX SEAL® LIQUID to fully cure?
A: FLEX SEAL® LIQUID cures faster in hot summer months and slower in cold winter months. Depending on thickness of application, temperature and humidity, FLEX SEAL® LIQUID will dry to the touch in 6 to 12 hours and fully cure in 24 to 48 hours. If the treated area is wet or very soft, it will need more time to cure.
Q: What colors does FLEX SEAL® Liquid come in?
A: Black, White, Clear and Gray.
Q: What size containers does FLEX SEAL® LIQUID come in?
A: Large 16oz can, Jumbo 32oz can, Giant gallon.
Q: What surfaces can I use FLEX SEAL® LIQUID on?
A: FLEX SEAL® LIQUID can be used on most surfaces and the applications are endless.
Excellent For: Concrete, glass, brick, stucco, masonry, wood, copper, plastic, tile, fabrics, wires, vinyl, fiberglass, ceramic, porcelain, metal, aluminum, and natural stones, foam, asphalt, EIFS, TPO, PVC, EPDM, CSPE, Hypalon polyurethanes and so much more!
Q: What is the shelf life of FLEX SEAL® LIQUID?
A: FLEX SEAL® LIQUID has a shelf life of 24 months when properly stored. If the can remains open for an extended period of time a skin may form on the surface. In order to avoid skinning over, remove lid, use immediately and always replace the lid after each use. If skinning occurs remove the top layer and use product.
Q: Is FLEX SEAL® LIQUID safe to use around plants and animals?
A: Yes, once fully cured, FLEX SEAL® LIQUID is safe around plants and animals.
Q: What happens if the product begins to skin over in the can?
A: If the can remains open for an extended period of time a skin may form on the surface. In order to avoid skinning over, remove lid, use immediately and always replace the lid after each use. If skinning occurs remove the top layer and use product.
Q: How long will it take to receive my order?
A: Normal shipping is 2 to 4 weeks
Q: Will FLEX SEAL® LIQUID expand and contract in the summer and winter?
A: Yes, FLEX SEAL® LIQUID stretches, stays flexible, expands and contracts.
Q: Can I use FLEX SEAL® LIQUID on the inside of my rainwater barrel?
A: Yes, once fully cured, FLEX SEAL® LIQUID is safe on rain barrels.
Q: How much pressure will FLEX SEAL® LIQUID withstand?
A: The maximum pressure FLEX SEAL® LIQUID can withstand will vary based on the substrate and the conditions under which FLEX SEAL® LIQUID is applied. It’s always best to test a small area first.
Q: What temperatures will FLEX SEAL® LIQUID withstand?
A: FLEX SEAL® LIQUID has a wide temperature range from -80 to 350 degrees. FLEX SEAL LIQUID is best applied between 32 degrees and 120 degrees.
Q: Can I dilute FLEX SEAL® LIQUID?
A: FLEX SEAL® LIQUID is ready to use and should be used right out of the can. Do not dilute Flex Seal Liquid with solvents or water.
Q: Is FLEX SEAL® LIQUID mildew and chemical resistant?
A: YES, FLEX SEAL® LIQUID will resist many forms of mildew and chemical deterioration.
Q: How do I clean up FLEX SEAL® LIQUID?
A: You can clean uncured FLEX SEAL® LIQUID with a dry cloth or paper towel and mineral spirits. DO NOT USE water or alcohol based solvents.
Q: Will FLEX SEAL® LIQUID stop a leak or water intrusion on my basement wall?
A: Many people have had great success using FLEX SEAL® LIQUID to seal out water for basement walls.
Q: Can I apply FLEX SEAL® LIQUID on a wet surface or when it’s raining?
A: It’s always best to apply FLEX SEAL® LIQUID on a clean, dry surface free of grease and oil. If applied during a heavy rain some of the FLEX SEAL® LIQUID may wash away. Therefore, it best to apply 24 hours prior to a heavy rain, hail or snowfall.
Q: Will FLEX SEAL® LIQUID crack, peel, fade or yellow?
A: FLEX SEAL® LIQUID will not crack, peel, fade or yellow. Depending on environmental and application, additional coats may be needed.
Q: Is FLEX SEAL® LIQUID safe to use on a fishpond with live fish?
A: Once fully cured, FLEX SEAL® LIQUID is safe around plants and animals.
Q: Can I use FLEX SEAL® LIQUID to repair an automobile tire.
A: We do not recommend using FLEX SEAL® LIQUID to repair an automobile tire.
Q: Can I use FLEX SEAL® LIQUID to repair a gasoline tank?
A: We do not recommend using FLEX SEAL® LIQUID to seal a gasoline tank or any other flammable liquids.
Q: Can I use FLEX SEAL® LIQUID to repair an oil tank?
A: FLEX SEAL® LIQUID will repair and can be used on oil and oil tanks.
Q: Can I paint FLEX SEAL® LIQUID?
A: We do not recommend painting FLEX SEAL® LIQUID.